Boston Scientific accounts are for healthcare professionals only.
INGEVITY™+ Passive Fixation Pacing Lead
Reimbursement
Configure or select a product to continue to order
- Overview
- Technical specifications
- Ordering information
Overview
INGEVITY+ passive pacing lead enhanced design
Greater than 100% tensile strength1 increase with enhanced design changes.
Improved inner coil design
The traditional tri-filar inner coil of the INGEVITY+ passive pacing lead improves the torque transmission of the inner coil and allows for removal of the ETFE covering.
Improved joint design
- Incorporated joint design principles from the RELIANCE™ family of leads, which have multi-filar coils and proven performance
- Reduces potential stress concentrations which could cause conductor fracture if the coil was over-torqued or severely bent in a fatigue condition
- Strengthens the joint construction so the INGEVITY+ passive pacing lead can withstand extraction forces over 100% more than the previous generation
Explore cardiac rhythm management solutions
Discover innovative products, technologies and resources designed to support cardiac rhythm management, from procedure through patient follow-up.
Subscribe for updates on the INGEVITY+ passive pacing lead
Receive timely access to major announcements, opportunities to connect with your peers through educational events, and useful tools for you to help more patients.
Technical specifications
Download the INGEVITY+ Pacing Leads Spec Sheet
INGEVITY+ passive pacing leads utilize an IS-1 bipolar connector. The tip incorporates an IROX™ (iridium oxide) coating on the tip electrode.
| Parameter | INGEVITY+ Passive Fixation Pacing Lead |
| Model / Length | 7831 / 52 cm straight 7832 / 59 cm straight 7835 / 45 cm atrial J shape 7836 / 52 cm atrial J shape |
| Type | Bipolar atrial / ventricular straight and J-shape |
| Connector | IS-1 BI |
| Compatibility | Pulse generators with an IS-1 port, which accepts an IS-1 terminal |
| MRI Conditions of Use | ImageReady™ MR-Conditional System when used with an MR-Conditional pulse generator - Full body scan 1.5T and 3T |
| Introducer without guide wire | 6F (2.0 mm) |
| Introducer with guide wire | 9F (3.0 mm) |
| Fixation | Tined |
Nominal Electrode: Tip surface area Distance between electrodes Anode electrode
| 5 mm2 10.7 mm 20 mm2 |
Nominal Diameter: Insertion Anode electrode Lead body |
2.0 mm 2.0 mm 1.9 mm |
Material: External insulation Internal insulation Terminal ring contact IS-1 terminal pin contact Tip electrode Anode electrode |
Polyurethane (55 D) Silicone rubber 316L stainless steel 316L stainless steel IROX coated Pt-Ir IROX coated Pt-Ir |
| Conductor type | Tri-filar inner coil of MP35N™ and single-filar outer coil of MP35N with a silver core. (MP35N is a trademark of SPS Technologies, Inc.) |
| Steroid | 0.61 mg dexamethasone acetate |
| Radiopaque markers | Pt-Ir |
| Suture sleeve | Radiopaque white silicone rubber |
| C-code | 1898 |
Ordering information
References:
1. INGEVITY PLUS Passive Lead Explant Axial Strength Comparison, ELN 13891174, pg. 2.
Bench Test results may not necessarily be indicative of clinical performance.
CAUTION: The law restricts these devices to sale by or on the order of a physician. Indications, contraindications, warnings, and instructions for use can be found in the product labeling supplied with each device or at www.IFU-BSCI.com. Products shown for INFORMATION purposes only and may not be approved or for sale in certain countries.