Indicated for use in the retraction of soft tissue away from the operative suface allowing for enhanced access during urologic and gynecologic reconstructive procedures.
Contraindications
Contraindicated for procedures other than urologic and gynecologic reconstructive procedures.
Warnings
For single use only. Do not reuse, reprocess or resterilize.
Potential Adverse Effects
Potential adverse effects which may occur during urologic or gynecologic reconstructive procedures, include accidental perforations of the patient's anatomy.
Cautions
Federal (USA) law and governing law outside the USA restrict this device to sale by or on the order of a physician.
Trademark
TLC Retractor is manufactured by Applied Medical Technology, Inc. and exclusively distributed in the USA by Boston Scientific Corporation.
TLC is a trademark of Applied Medical Technology, Inc.
Polyform® Synthetic Mesh is intended to be utilized for surgical procedures pertaining to the pelvic floor. Polyform Synthetic Mesh is supplied sterile and provided in sheet form to be cut to size and sutured by the surgeon to meet the individual patient’s needs. Polyform Synthetic Mesh is manufactured from monofilament polypropylene fibers.
Polyform Synthetic Mesh is indicated for tissue reinforcement and stabilization of fascial structures of the pelvic floor in vaginal wall prolapse, where surgical treatment is intended, either as mechanical support or bridging material for the fascial defect.
Contraindications
Polyform Synthetic Mesh is contraindicated for use in any patient in whom soft tissue implants are contraindicated. These patients include those with:
Warnings
Contents supplied STERILE using an ethylene oxide (EO) process. Do not use if sterile barrier is damaged. If damage is found, call your Boston Scientific representative. For single patient use only. Do not reuse, reprocess or resterilize. Reuse, reprocessing or resterilization may compromise the structural integrity of the device and/or lead to device failure which, in turn, may result in patient injury, illness or death. Reuse, reprocessing or resterilization may also create a risk of contamination of the device and/or cause patient infection or cross-infection, including, but not limited to, the transmission of infectious disease(s) from one patient to another. Contamination of the device may lead to injury, illness or death of the patient. After use, dispose of product and packaging in accordance with hospital, administrative and/or local government policy.
Potential Adverse Effects
Cautions
Trademark
Polyform is a trademark of Boston Scientific Corporation or its affiliates. Copyright ©2007 - All Rights Reserved
Polyform Synthetic Mesh is manufactured by Proxy Biomedical Limited and is distributed by Boston Scientific Corporation.
The Capio Suture Capturing Device is intended for use in general suturing applications during open and endoscopic surgery to assist in the placement of suture material in tissues at the operative site and is to be used under direct visualization only.
Contraindications
The use of the Capio Suture Capturing Device is contraindicated as follows: When, in the judgement of the physician, open or endoscopic procedures would be contrary to the best interests of the patient; and for placing sutures into or through bone.
Warnings
For single use only. Do not reuse, reprocess or resterilize. Use only needles and sutures specified for use with the Capio Suture Capturing Device.
Potential Adverse Effects
The potential adverse effects which may result from suture placement procedure include, but are not limited to: injury to internal vessels and nerves, bleeding, hematoma, inflammatory reaction to the suture material or to the trauma of being sutured.
Cautions
Federal (USA) law and governing law outside the USA restrict these devices to sale by or on the order of a physician.